Something Useful

 

It seemed like an interesting challenge to make something that's both useful and beautiful - or at least cute! After some thought, I settled on these little dishes.  They could be trinket dishes, soap dishes, or dishes for dipping sauce.

 

I made my own plaster drape mold for the basic shape.  To make the mold I partially filled an old plastic pasta sauce container, whose shape I liked, with plaster of Paris.  It took about three days for the plaster to dry completely and I was getting more and more impatient to start on my project.

 

I knew I wanted something on the bottom and something on the rim.  And for the bottom, I wanted a pretty flat design.  So I settled on the lizards and leaves.  The leaves only stick up about 1/8" from the flat bottom of the dish.  That would allow soap to drain, but wouldn't interfere with contents if one chose to use them as trinket or sauce dishes.  As far as the sauce dish goes, though, I would recommend not using them to hold something you would have to get out with a spoon as the metal spoon might chip the edge of the leaves.

 

The lizards were fun to sculpt and I developed a quick and pretty good method for making them.  The head, body, and tail are a single piece.  Then I made two little balls of clay, one larger than the other, and cut them in half.  The smaller hemispheres made the shoulders and upper arms while the larger ones made the hips and upper legs.  Then I rested the lizard on the rim where I wanted it and marked where the feet should go on the dish.  I attached the feet/lower leg pieces directly to the dish, then pressed the rest of the lizard in place.  Smoothing the joints and adding the texture were the final touches.

 

I'm thinking turtles would be good subjects also, maybe with flat shells as the design for the bottoms of the dishes.



Smiling Howling Wolf

This wolf was in the kiln with the raccoon shaman, and I am so pleased with the way the glaze came out.  Considering the struggles I was having with glazing - not to say that there isn't still a tremendous amout to learn - I think I now have a procedure that works for me, and I'll share it is a blog post soon.

I think I used about five different glazes on this wolf and a few of them were Mayco Elements which give a stoneware look to low fire ceramics.  I find them very beautiful the way the colors develop and break in the firing.  So, thank you, Mayco!

I find myself using my little copper wire coils over and over again, impressing them to make designs in my sculptures.  At first I thought this repetition was a problem, but I now accept it as a type of visual signature - not a bad thing!

What is a Raccoon's Special Knowledge?

 I just finished glazing this little raccoon shaman.  He is 4" tall, so pretty small.  The placement of the glaze on his head was pretty exacting and I'm pleased with the way it turned out.  I think it may be the most detailed glaze pattern I've attempted so far.

For the cloak, I used two little stamps that I purchased a few years ago and finally found a euse for, and also my trusty wire coils.

I'd like to make some small patterned stamps of my own.  That would make my pieces more truly mine.  I guess I could do that.  Just have to do the camera-ready art work and find a place that makes stamps.  So....I'll put that on my list!

There's another little shaman waiting for me to glaze - two more, actually.  A goat and a fox.  The color I used for the top of the raccoon's head would probably work for the fox.  Too bad I can't remember what it was!

Fun with Macrame and Beading

While browsing the internet I happened by www.beadshop.com and found a video tutorial for making this wrap bracelet.  So now I'm hooked.  You start with a length of 2mm leather cord and string a button on it to the middle.  Then you fold the two halves of the cord down and begin macramé-ing around them.  Adding beads and changing the macramé cord colors makes it especially interesting.

 

I've made several now and am putting them in my Etsy shop.  It's also been fun scouring Etsy for interesting buttons like this one which is from another Etsy shop, www.etsy.com/shop/theanimalsmagicshop.  It's pewter and is signed on the back.  I think it says "Danforth fish" but the writing is very tiny and somewhat worn.

 

Here's another bracelet.  This button is also pewter, with a nice design of a sheep or ram encircled with stars.  I added some beaded dangles to this bracelet.  These are very fun to make!

 



Inspiration from Gay

I am so fortunate that a lovely woman has purchased two necklaces from my Etsy shop.  She told me her favorite animals and asked if I would consider doing any of them.  One was a sloth, and here's my piece made to her inspiration.  She was kind enough to purchase it as soon as she saw the listing, and it certainly feels great to have one's art appreciated.

I sculpted the sloth and branch from polymer clay.  I poked holes vertically through the branch to accommodate beading, and pressed a hollow on each end of the branch so that I could glue in the braided leather cord to form the necklace.  The thing I'm proudest about with this necklace is that I thought of continuing the beading beyond just the branch and partway up the braided leather cord on each side.  I think that does a couple of good things.  First, it integrates the focal piece with the cord, and second it visually diminishes the difference in diameter between the cord and the branch.

So, all in all, I'm happy with this piece, and I hope Gay will be too.

Forest Warrior

 

Here's a ceramic piece that I did that is, by now, mixed media.  The concept evolved.  I knew I wanted to sculpt a squirrel and make him/her a character of some sort.  Inspired by my favorite TV show, "Vikings," I decided to make a Viking warrior, a defender of the forest.

 

After I was started on it, I decided that it would be my entry to the KVIE Art Auction.  KVIE is the Sacramento public TV station and every year that have a fund-raising art auction.  Artists donate their pieces, but it's juried.  The idea is that artists will get valuable publicity.  You know how that argument goes.  I wasn't that keen on it, but finally decided to go ahead.  The "in person" jurying is tomorrow.

 

So this afternoon I visited KVIE's website to get the application to fill out and saw that 3D pieces have to be at least 12" in one dimension.  My squirrel was 7" tall!  Yikes!  What to do?  I was going to forget about the whole thing, but my friend talked me into improvising some additional height.

 

So I attached him to this slab of oak branch that I had lying around from tree trimming a couple of years ago.  Adding the feathers to his hair boosted him to the required 12".

 

The base was no problem for me.  I had been considering putting him on a base to add stability.  In fact, I put holes in the bottoms of his feet for just that eventuality.  But the feathers are sort of an issue.  I thought he looked quite Viking-esq with his round shield, battle-axe, and, most especially, his braided Mohawk - just like Ragnar's in my beloved TV show!  But the feathers just don't seem very Viking.  Oh, well.  I guess I sacrificed "authenticity" (as if a Viking warrior squirrel had any authenticity to begin with) for "height."

 

By the way, the shield is paper clay formed over cardboard with a button in the middle and then painted.  The battle-axe is a polymer clay ax head (finished with antique silver mica powder) secured on a piece of tree root.  (I think tree roots are even better than branches!)  There's a hole in the ax head so I could slip it onto the root.  It's glued in place then wrapped with artificial sinew.  His hair is felted and braided wool fiber.

Scroll Work in Clay

 

I have been inspired to do these little wall plaques with Christian themes, and there will be more in the future.  This one is about that admonition, that I find so challenging,  to value the goats as I value the sheep.  Of course I'm talking about the metaphor because it's no problem to admire both real sheep and real goats!  It's the human "goats" (no offense, real goats!) that are the problem.

 

Anyway, I have inscribed a Latin phrase on this plaque - "Omnia cara in oculi Dei," or, "all are dear in the eyes of God."

 

Sculpting the little sheep and goat heads was fun and no problem.  But how to design the plaque?  I thought the effect was a bit architectural, so I decided to add sculpted scrolls.  They weren't difficult at all to sculpt.  The difficulty came in with the glazing.  Painting neatly around them was very tricky!  But I persevered, and like the result.

 

The lavender glaze in the background is a Mayco Elements glaze, and I really like the mottled effect they give.

 

By the way, there are little violets from my yard in the photo because I wanted to give an idea of the size of the plaque.  This is one of the photos of it that I used in my listing in my Etsy shop, TheFoxesGarden,